Cypress Semiconductor /psoc63 /BACKUP /RTC_RW

Read bit When this bit is set the RTC registers will be copied to user registers and frozen so that a coherent RTC value can safely be read. The RTC will keep on running. Do not set the read bit if the RTC is still busy with a previous update (see RTC_BUSY bit) or if the Write bit is set. Do not set the Read bit at the same time that the Write bit is cleared.

Write bit Only when this bit is set can the RTC registers be written to (otherwise writes are ignored). This bit cannot be set if the RTC is still busy with a previous update (see RTC_BUSY bit) or if the Read bit is set or getting set. The user writes to the RTC user registers, when the Write bit is cleared by the user then the user registers content is copied to the actual RTC registers. Only user RTC registers that were written to will get copied, others will not be affected. When the SECONDS field is updated then TICKS will also be reset (WDT is not affected). When the Write bit is cleared by a reset (brown out/DeepSleep) then the RTC update will be ignored/lost. Do not set the Write bit if the RTC if the RTC is still busy with a previous update (see RTC_BUSY). Do not set the Write bit at the same time that the Read bit is cleared.